Phone Lens 2 in 1 - 0.45X Phone Lens (Wide + Macro)

¡Date prisa! Solo quedan unidades en stock.

Gel acrílico DNKa' para uñas Acrygel líquido #0017 Smoothie 12 ml

$19.99
Haz tu pedido en la próxima [hora] para recibirlo entre y

Acrylic gel DNKa' for nails Liquid Acrygel #0017 Smoothie 12 ml is a three-phase liquid acryl gel used for simultaneous nail strengthening, leveling, and repair, suitable for extensions. Its medium, self-leveling consistency allows for thin, controlled application, maintaining architecture without deformation until correction. Created for consistent, professional results. Key Benefits Universal application for strengthening, extension, reconstruction, and correction. Medium-to-liquid consistency ensures controlled fluidity and self-leveling. Maintains stable architecture during wear without sagging or losing shape. Suitable for all nail types,...

[vendido] vendido en las últimas [hora] horas
Agregar a la lista de deseosComparar

AmericanExpressApplePayGooglePayMasterCardPayPalVisa
Envío y devoluciónHaz una pregunta
La gente está viendo esto ahora mismo
SKU: LAD0017
Disponibilidad: En stock Preorden Agotado
Categorías: Acrygels y Polygels Clavos
Etiquetas: Acrygels and Polygels
Descripción

Acrylic gel DNKa' for nails Liquid Acrygel #0017 Smoothie 12 ml is a three-phase liquid acryl gel used for simultaneous nail strengthening, leveling, and repair, suitable for extensions. Its medium, self-leveling consistency allows for thin, controlled application, maintaining architecture without deformation until correction. Created for consistent, professional results.

Key Benefits

  • Universal application for strengthening, extension, reconstruction, and correction.
  • Medium-to-liquid consistency ensures controlled fluidity and self-leveling.
  • Maintains stable architecture during wear without sagging or losing shape.
  • Suitable for all nail types, including sensitive and thin plates.
  • Compatible with DNKa' Rubber Base and Multi Base for reliable adhesion.
  • Comfortably polymerizes in LED/UV lamps, reducing service time.
How to use
  1. Perform standard preparation: file the shape, treat the cuticle, buff to a matte finish, and degrease.
  2. Apply a dehydrator followed by a thin layer of acid-free primer (Ultrabond).
  3. For optimal adhesion, apply a thin layer of DNKa' base (Rubber Base or Multi Base) and cure.
  4. Apply Liquid Acrygel in a thin leveling layer, modeling the desired architecture.
  5. Cure in LED/UV 48 W for 2 minutes; apply a second layer and cure again for 2-3 minutes if needed.
  6. Remove the dispersion layer, file the final shape, and cover with a top coat.
Professional notes
  • A sensitivity test (Patch Test) must be performed 24 hours prior to first use.
  • Avoid contact with skin and eyes; rinse immediately with water if contact occurs.
  • Ensure the container is tightly closed and store away from direct heat and sunlight.
  • External use only.

Preguntas frecuentes

¿No encuentras la respuesta que buscas? ¡Contáctanos!

¿Cómo puedo rastrear mi pedido?

Se proporcionará seguimiento para todos los pedidos y se le enviará un correo electrónico una vez que se envíe su pedido.